The most advanced and high speed vertical ampoule filling and sealing machine with eight head is quite significant as far as the production capacity is concerned. Per minute output is 80 to 280 ampoules with 0.5ml to 10ml filling capacity in single dose. Ampoule Filler And Sealer works well with the varied ampoule sizes ranging from 1ml to 10ml open mouth glass ampoules. Our ampoule filling and sealing machines having CE certifications
Manufacture Precision:-
Precise volume filling, minimum breakage, accurate quality sealing without defects and high reliability are the important functionalities. Heavy duty SS piping for jerk free operations, Stainless steel cladding, epoxy paint and MS anti-rust treatment to plates (base, side and middle) have made the structure sturdy for long run.
Ampoule Filling and Sealing Operation:-
Ampoules can be infeed through SS conveyor from a sterilizing tunnel and transfer them to a segment wheel to carry on to a moving rack, which transfers the ampoules in vertical position through the station one by one. The ampoules are discharged to the collection tray after sealing.
Production Capacity can be varied based on the size of ampoules. 290 ampoules can be processed per minute for 1ml size. Similarly if the size of ampoule is 2ML than 270 Ampoules, 3ML 260 Ampoules, 5ML 240 Ampoules, and 10ML 150 Ampoules per Minute output can be achieved.
Actual output can be ± 10 % depending on diameter of ampoules. – Tolerance and diameter ± 0.25mm & height is ± 5mm.
Salient Features
Technical Specification
Model No. | HFS-300V (High Speed) (Attached to Sterilizing Tunnel) On Line model |
Ampoule Sizes | 1ml to 10ml Open Mouth Glass Ampoules |
Filling Capacity | From 0.5ml to 10ml in single dose |
Filling Type | Piston Pumps Type Filling (Volumetric) |
Contact Parts | Stainless Steel AISI 316L (For Filling Nozzle & Syringe / Pump) |
Output / Minute | 80 to 280 Ampoules / Minute (Depend on ampoules sizes) |
No. of Head For Fill & Seal | Eight (Vertical) |
Require Gases For Sealing | LPG & Oxygen (Mixture) |
Nitrogen Purging | Available (Pre & Post) |
Pre Heating | Available |
Power Require | 2 H.P., 380 Volts, 3 Phase, 50 Hz (4 Wire Systems) OR 2 H.P., 220 Volts, 1 Phase, 50 Hz OR Customised |
Over All Dimensions | 2950mm (L) X 1000mm (W) X 1200mm (H) |
Net Weight | 1550 Kgs. |
Gross Weight (With Wooden Case) | 1900 Kgs. |
Harsiddh Eight Head Ampoule Filling and Sealing Machine as the name suggests equipped with eight head to fill injection ... Continue
Harsiddh Automatic six head ampoule filling and sealing machine follows Angle Travel principle with improved filling cap... Continue
Precisely formulated four head filling and sealing machine for ampoules are built with quality components and even offer... Continue
Harsiddh Two head ampoule filling and sealing machine is used to fill 0.5ml to 25ml liquid filling with 2 head fillers a... Continue
Harsiddh Single head ampoule filling and sealing machine is used to fill and seal injectable liquids in glass ampoules. ... Continue